A large number of sheet metal stamping parts are widely applied in the automotive industry, home appliance industry, daily hardware industry, electronics 3C industry and other fields to meet the requirements for strength and appearance.
Our Services
1. Mold Manufacturing
At BL, we can customize stamping dies exclusively for mass production.
Our engineers will select the corresponding suitable stamping process to manufacture the mold based on the part drawings and your requirements.
2. Stamping Production
The tonnage of our punch presses ranges from 6.3 tons to 1250 tons.
Commonly Used Grades of Sheet Metal Materials and Their Application Scenarios
| Stamping Grade | GB Standard | EN Standard (Numeric Code) | JIS Standard | Old German Standard Grade | Yield Strength (MPa) | Elongation | Stamping Application |
| Ordinary Forming Grade | DC01 | 1.0301 | SPCC | St12 | ≤280 | ≥28% | Simple bending, shallow stamping, chassis shells, small hardware parts |
| General Stamping Grade | DC03 | 1.033 | SPCD | St13 | ≤240 | ≥32% | Conventional drawing, home appliance shells, shallow deep-drawn parts |
| Deep Drawing Grade | DC04 | 1.0338 | SPCE | St14 | ≤210 | ≥36% | Car doors, kitchenware, moderately complex deep-drawn parts |
| Extra Deep Drawing Grade | DC05 | 1.0347 | SPCF | St15 | ≤190 | ≥39% | Complex curved surfaces, battery shells, precision drawn parts |
| Ultra Extra Deep Drawing Grade | DC06 | 1.0345 | SPCG | St16 | ≤180 | ≥42% | Automotive panels, extremely complex deep drawing, precision parts with zero springback |
| Ultimate Deep Drawing Grade | DC07 | 1.0393 | SPCH | St17 | ≤170 | ≥44% | Ultra-high difficulty one-piece drawing, high-end auto body parts |
If you have any questions about our production, just give us a call or send us an e-mail.
Let us brighten your life with safety, efficiency,and expert craftsmanship.
Contact Us
Phone : +86-159 0682 2387
WhatsApp/Wechat: +86-159 0682 2387
Email : info@bailusolution.com
Copyright © 2026 Huzhou Bailu Technology Co., Ltd. All Rights Reserved. Design by BONTOP.